Project Information
Service & Panel Parameters
Sub-panels
Connected Loads (one row = one branch circuit)
| Description | Panel | Qty | Watts ea. | PF | Phase | DF % | L (m) | Conduit | Cont. |
|---|
Phase "3" applies only when the service is 3Ø 400/230 V. Cont. = continuous load (breaker and wire at 125%).
Design Summary
PEC Conduit Fill Check (Ch. 9, Tables 1 & 5)
| Circuit | Conductors | Area mm² | Conduit | Fill | Limit | Status |
|---|
Limit: 53% (1 conductor), 31% (2), 40% (over 2). The equipment ground counts as a conductor. Areas are per PEC Ch. 9 Table 4 for the selected conduit type (PVC, EMT, IMC or RSC); verify against the manufacturer's data.
Design Verification & Action Guide
| Check | Status | Action |
|---|